
DIN
Search Result: About 28032 results.
Breadcrumb
- Home
- Industry standards
- Search Result
- 【Organization】DIN
- 【Document #】DIN EN 13126-17
Building hardware - Requirements and test methods for windows and doors height windows - Part 17: Hardware for Tilt&Slide windows and doors
- 【Date】2008/4/1
- 【Language】English
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN EN 1407
Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides
- 【Date】2008/4/1
- 【Language】English
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN EN 1410
Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides
- 【Date】2008/4/1
- 【Language】English
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN EN 1408
Chemicals used for treatment of water intended for human consumption - Poly(diallyldimethylammonium chloride)
- 【Date】2008/4/1
- 【Language】English
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN EN 1409
Chemicals used for water treatment intended for human consumption - Polyamines
- 【Date】2008/4/1
- 【Language】English
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN EN ISO 12127-2
Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 2: Test method using contact heat produced by dropping small cylinders (ISO 12127-2:2007)
- 【Date】2008/4/1
- 【Language】English
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN EN ISO 10062
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) (ISO 10062:2006)
- 【Date】2008/4/1
- 【Language】English
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN EN 15496
Cycles - Requirements and test methods for cycle locks
- 【Date】2008/4/1
- 【Language】English
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN EN ISO 3630-1
Dentistry - Root-canal instruments - Part 1: General requirements and test methods (ISO 3630-1:2008)
- 【Date】2008/4/1
- 【Language】English
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN EN ISO 21078-1
Determination of boron (III) oxide in refractory products - Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes (ISO 21078-1:2008)
- 【Date】2008/4/1
- 【Language】English
- 【Status】Active