IEC
Search Result: About 7216 results.
Breadcrumb
- Home
- Industry standards
- Search Result
- 【Organization】IEC
- 【Document #】IEC 62343-1
Dynamic modules – Part 1: Performance standards – General conditions - Edition 1.0
- 【Date】2016/2/1
- 【Language】English
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 62841-3-4
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-4: Particular requirements for transportable bench grinders - Edition 1.0
- 【Date】2016/2/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 62999
Electric room heating – Underfloor heating – Performance characteristics – Definitions, method of testing, sizing and formula symbols - Edition 1.0
- 【Date】2016/2/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC TR 61000-1-7
Electromagnetic compatibility (EMC) - Part 1-7: General - Power factor in single-phase systems under non-sinusoidal conditions - Edition 1.0
- 【Date】2016/2/1
- 【Language】English
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 62572-3
Fibre optic active components and devices – Reliability standards – Part 3: Laser modules used for telecommunication - Edition 3.0
- 【Date】2016/2/1
- 【Language】English
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC TR 61282-12
Fibre optic communication system design guides – Part 12: In-band optical signal-to-noise ratio (OSNR) - Edition 1.0
- 【Date】2016/2/1
- 【Language】English
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 61757-1-1
Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings - Edition 1.0
- 【Date】2016/2/1
- 【Language】English
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC TS 60695-11-11
Fire hazard testing – Part 11-11: Test flames – Determination of the characteristic heat flux for ignition from a non-contacting flame source - Edition 2.0
- 【Date】2016/2/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60384-1
Fixed capacitors for use in electronic equipment – Part 1: Generic specification - Edition 5.0
- 【Date】2016/2/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60384-1 (REDLINE + STANDARD)
Fixed capacitors for use in electronic equipment – Part 1: Generic specification - Edition 5.0
- 【Date】2016/2/1
- 【Language】English
- 【Status】Active