DIN
Search Result: About 28032 results.
Breadcrumb
- Home
- Industry standards
- Search Result
- 【Organization】DIN
- 【Document #】DIN 51412-1
Testing of petroleum products - Determination of electrical conductivity - Part 1: Laboratory method
- 【Date】2005/6/1
- 【Language】English
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN 51412-1
Testing of petroleum products - Determination of the electrical conductivity - Part 1: Laboratory method
- 【Date】2005/6/1
- 【Language】German
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN 53235-1
Testing of pigments - Tests on specimens having standard depth of shade - Part 1: Standard depths of shade
- 【Date】2005/6/1
- 【Language】German
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN 53235-2
Testing of pigments - Tests on specimens having standard depth of shade - Part 2: Adjustment of specimens to standard depth of shade
- 【Date】2005/6/1
- 【Language】German
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN 69882-1
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 1: Designation system, technical delivery conditions
- 【Date】2005/6/1
- 【Language】German
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN 69882-2
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive - Dimensions
- 【Date】2005/6/1
- 【Language】German
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN 69882-3
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 3: Type B, milling machine arbors with enlarged contact surface diameter for milling cutters with parallel key drive - Dimensions
- 【Date】2005/6/1
- 【Language】German
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN 69882-4
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for parallel shanks with lateral driving surface - Dimensions
- 【Date】2005/6/1
- 【Language】German
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN 69882-5
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D, holders for parallel shanks with inclined clamping surface - Dimensions
- 【Date】2005/6/1
- 【Language】German
- 【Status】Active
- 【Organization】DIN
- 【Document #】DIN 69882-6
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E, clamping chuck for collets with 8° setting angle - Dimensions
- 【Date】2005/6/1
- 【Language】German
- 【Status】Active