Hinton Information Services

Need Some Help?
We can help you find the information that meets your research needs.
Please call us at
+886 2 27993110
or send an email to us at standards@hintoninfo.com

Organization / Document #
ASTM
Search Result: About 13242 results.

Breadcrumb

  • 【Organization】ASTM
  • 【Document #】ASTM D4628

  • Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

  • 【Date】2016/12/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】ASTM
  • 【Document #】ASTM E2680

  • Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)

  • 【Date】2016/12/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】ASTM
  • 【Document #】ASTM D6024/D6024M

  • Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application

  • 【Date】2016/12/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】ASTM
  • 【Document #】ASTM E2975

  • Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers

  • 【Date】2016/12/1
  • 【Reaffirmed Date】(E 2017)
  • 【Language】English
  • 【Status】Active
  • 【Organization】ASTM
  • 【Document #】ASTM D7959

  • Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip

  • 【Date】2016/12/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】ASTM
  • 【Document #】ASTM D5386

  • Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

  • 【Date】2016/12/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】ASTM
  • 【Document #】ASTM D6023

  • Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)

  • 【Date】2016/12/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】ASTM
  • 【Document #】ASTM D4048

  • Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

  • 【Date】2016/12/1
  • 【Reaffirmed Date】(E 2017)
  • 【Language】English
  • 【Status】Active
  • 【Organization】ASTM
  • 【Document #】ASTM D4623

  • Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge

  • 【Date】2016/12/1
  • 【Language】English
  • 【Status】Active
  • 【Organization】ASTM
  • 【Document #】ASTM D5731

  • Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

  • 【Date】2016/12/1
  • 【Language】English
  • 【Status】Active