ISO
Search Result: About 21829 results.
Breadcrumb
- Home
- Industry standards
- Search Result
- 【Organization】ISO
- 【Document #】ISO 18554
Surface chemical analysis - Electron spectroscopies - Procedures for identifying, estimating and correcting for unintended degradation by X-rays in a material undergoing analysis by X-ray photoelectron spectroscopy - First Edition
- 【Date】2016/3/15
- 【Language】English
- 【Status】Active
- 【Organization】ISO
- 【Document #】ISO 17751-1
Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 1: Light microscopy method - First Edition
- 【Date】2016/3/15
- 【Language】English
- 【Status】Active
- 【Organization】ISO
- 【Document #】ISO 17751-2
Textiles - Quantitative analysis of cashmere, wool, other specialty animal fibers and their blends - Part 2: Scanning electron microscopy method - First edition
- 【Date】2016/3/15
- 【Language】English
- 【Status】Active
- 【Organization】ISO
- 【Document #】ISO 10889-2
Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs - Third Edition
- 【Date】2016/3/15
- 【Language】English
- 【Status】Active
- 【Organization】ISO
- 【Document #】ISO 10889-4
Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat - Third Edition
- 【Date】2016/3/15
- 【Language】English
- 【Status】Active
- 【Organization】ISO
- 【Document #】ISO 10889-5
Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat - Second Edition
- 【Date】2016/3/15
- 【Language】English
- 【Status】Active
- 【Organization】ISO
- 【Document #】ISO 10889-6
Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat - Third Edition
- 【Date】2016/3/15
- 【Language】English
- 【Status】Active
- 【Organization】ISO
- 【Document #】ISO 10889-7
Tool holders with cylindrical shank - Part 7: Type F with taper seat - Third Edition
- 【Date】2016/3/15
- 【Language】English
- 【Status】Active
- 【Organization】ISO
- 【Document #】ISO 17208-1
Underwater acoustics - Quantities and procedures for description and measurement of underwater sound from ships - Part 1: Requirements for precision measurements in deep water used for comparison purposes - First Edition
- 【Date】2016/3/15
- 【Language】English
- 【Status】Active
- 【Organization】ISO
- 【Document #】ISO TR 25901-1
Welding and allied processes - Vocabulary - Part 1: General terms - First Edition
- 【Date】2016/3/15
- 【Language】English
- 【Status】Active