IEC
Search Result: About 7216 results.
Breadcrumb
- Home
- Industry standards
- Search Result
- 【Organization】IEC
- 【Document #】IEC 60603-7-41
Connectors for electronic equipment – Part 7-41: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz - Edition 1.0
- 【Date】2010/3/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60603-7-51
Connectors for electronic equipment – Part 7-51: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz - Edition 1.0
- 【Date】2010/3/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC PAS 61076-2-110
Connectors for electronic equipment – Product requirements – Part 2-110: Circular connectors – Detail specification for circular connectors M 12 × 1 with screw-locking, for high speed Ethernet and high speed data communication with frequencies up to 500 M
- 【Date】2010/3/1
- 【Language】English
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60512-19-1
Connectors for electronic equipment – Tests and measurements – Part 19-1: Chemical resistance tests – Test 19a: Fluid resistance of pre-insulated crimp barrels - Edition 1.0
- 【Date】2010/3/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60512-24-1
Connectors for electronic equipment – Tests and measurements – Part 24-1: Magnetic interference tests – Test 24a: Residual magnetism - Edition 1.0
- 【Date】2010/3/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60512-7-1
Connectors for electronic equipment – Tests and measurements – Part 7-1: Impact tests (free connectors) – Test 7a: Free fall (repeated) - Edition 1.0
- 【Date】2010/3/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60512-9-1
Connectors for electronic equipment – Tests and measurements – Part 9-1: Endurance tests – Test 9a: Mechanical operation - Edition 1.0
- 【Date】2010/3/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60512-9-5
Connectors for electronic equipment – Tests and measurements – Part 9-5: Endurance tests – Test 9e: Current loading, cyclic - Edition 1.0
- 【Date】2010/3/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC TR 62652
Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.3af (power-over-ethernet) applications - Edition 1.0
- 【Date】2010/3/1
- 【Language】English
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC TS 60349-3
Electric traction – Rotating electrical machines for rail and road vehicles – Part 3: Determination of the total losses of converter-fed alternating current motors by summation of the component losses - Edition 2.0
- 【Date】2010/3/1
- 【Language】English; French
- 【Status】Active