IEC
Search Result: About 7216 results.
Breadcrumb
- Home
- Industry standards
- Search Result
- 【Organization】IEC
- 【Document #】IEC 62024-2
High frequency inductive components – Electrical characteristics and measuring methods – Part 2: Rated current of inductors for DC to DC converters - Edition 1.0
- 【Date】2008/10/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 62535
Insulating liquids – Test method for detection of potentially corrosive sulphur in used and unused insulating oil - Edition 1.0
- 【Date】2008/10/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60364-4-43 CORR 1
Low-voltage electrical installations – Part 4-43 : Protection for safety – Protection against overcurrent CORRIGENDUM 1 - Edition 3.0
- 【Date】2008/10/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60794-2-30
Optical fibre cables – Part 2-30: Indoor cables – Family specification for ribbon cables - Edition 2.0
- 【Date】2008/10/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60794-3-40
Optical fibre cables – Part 3-40: Outdoor cables – Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers - Edition 1.0
- 【Date】2008/10/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60794-3-50
Optical fibre cables – Part 3-50: Outdoor cables – Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes - Edition 1.0
- 【Date】2008/10/1
- 【Language】English
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 60794-3-60
Optical fibre cables – Part 3-60: Outdoor cables – Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes - Edition 1.0
- 【Date】2008/10/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 61298-1
Process measurement and control devices – General methods and procedures for evaluating performance – Part 1: General considerations - Edition 2.0
- 【Date】2008/10/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 61298-2
Process measurement and control devices – General methods and procedures for evaluating performance – Part 2: Tests under reference conditions - Edition 2.0
- 【Date】2008/10/1
- 【Language】English; French
- 【Status】Active
- 【Organization】IEC
- 【Document #】IEC 61298-3
Process measurement and control devices – General methods and procedures for evaluating performance – Part 3: Tests for the effects of influence quantities - Edition 2.0
- 【Date】2008/10/1
- 【Language】English; French
- 【Status】Active