Top 10 Pumps and Motors Market Pumps (Intelligent Pump, High Pressure Pump, Cryogenic Pump, Diaphragm Pump, Submersible Pump), Motors (Gear Motor, Permanent Magnet Synchronous, Motor Control Center, Motor Soft Starter, & AC Drives) - Global Forecast to 2021

“Top 10 pumps and motors market is expected to reach USD 100.66 billion by 2021”
The Top 10 pumps and motors market is expected to grow from an estimated USD 71.01 billion in 2016 to USD 100.66 billion by 2021. Factors such as upgradation of old power infrastructure, increased investments in renewable energy, focus on energy-efficiency, increasing industrialization, and growing urban population are driving the global market. High initial cost of motors, high maintenance cost, and decrease in greenfield investment are factors that could restrain the growth in this market.
“The intelligent pumps market would grow at a faster pace during the forecast period”
The intelligent pumps market is expected to grow at the fastest pace during the forecast period. Europe and North America offer high growth opportunities for suppliers of intelligent pumps. Industrial internet of things (IIoT) & economic benefits of intelligent systems are some of the factors that are increasing the demand for intelligent pumps market in these regions. Apart from that, factors such as focus on energy efficiency, increasing industrialization would drive the growth of the intelligent pumps market.
“Asia-Pacific is the largest market for most pumps and motors”
Asia-Pacific is the largest market for most of the products in Top 10 pumps and motors market. In the Asia-Pacific, the market growth of Top 10 pumps and motors can be attributed to factors such as upgradation of old power infrastructure, focus on energy efficiency, increasing industrialization, and growing urban population, among others. Factors such as increasing gas-based generation, development in water and wastewater & sanitation sector also aids in market growth.
Breakdown of Primaries
In-depth interviews have been conducted with various key industry participants, subject-matter experts, C-level executives of key market players, and industry consultants among other experts to obtain and verify critical qualitative and quantitate information as well as assess future market prospects. The distribution of primary interviews is as follows:
By Company Type: Tier 1–62%, Tier 2–23%, and Tier 3–15%
By Designation: C-Level–35%, Director Level–25%, and Engineer Level–40%
By Region: Asia-Pacific–45%, Europe–30%, Americas–17%, and RoW–8%
Note: Row = Rest of the World
The tier of the companies has been defined on the basis of their total revenue, as of 2015: Tier 1 => USD 10 billion, Tier 2 = From USD 1 billion to USD 10 billion, and Tier 3 =< USD 1 billion

The industry’s leading players have been profiled with their recent developments and other strategic activities. These include ABB Ltd. (Switzerland), Danfoss A/S (Denmark), Eaton Corporation Plc. (Ireland), Emerson Electric Co. (U.S.), Flowserve Corporation (U.S.), General Electric (U.S.), Grundfos Group (Denmark), Sulzer Ltd (Switzerland), Hitachi Ltd. (Japan), Xylem Inc. (U.S.), Yaskawa Electric Corporation (Japan), Schneider Electric SE (France), and Siemens AG (Germany), among others.
Research Coverage
This study estimates the global Top 10 pumps and motors market, in terms of USD, till 2021 and segments the Top 10 pumps and motors market with respect to region and end-user. This report provides a comprehensive review of major market drivers, restraints, opportunities, and challenges of the market. The report also covers various important aspects of the market such as competitive landscape, market ranking, market estimates in terms of value, and future trends in the Top 10 pumps and motors market.

Scope of the report
 Pumps
‧ Intelligent Pumps
‧ High pressure pumps
‧ Cryogenic pumps
‧ Diaphragm pumps
‧ Submersible pumps

 Motors
‧ Gear motors
‧ Permanent magnet synchronous motors
‧ Motor control center
‧ Motor soft starters
‧ AC drives

 End-User*

 By Region
‧ Asia-Pacific
‧ Europe
‧ North America
‧ South America
‧ Middle East and Africa
*End-User varies for each pump and motor type

Why buy this report?
1. The report identifies and addresses key markets for pumps and motors, which is useful for suppliers and OEMs to review production and distribution plans.
2. The report includes analysis of key markets of pumps and motors. It also analyzes historical trends and also forecast for 2021, assisting in strategic decision making.
3. It presents competition by analyzing recent market developments such as key contracts, new product launches, expansions, and mergers & acquisitions from the key global market players. It helps understand the competition strategies and plan respective initiatives.

TABLE OF CONTENTS

1 INTRODUCTION 21
1.1 OBJECTIVES OF THE STUDY 21
1.2 MARKET DEFINITION 21
1.2.1 INTELLIGENT PUMPS 21
1.2.2 HIGH PRESSURE PUMPS 21
1.2.3 CRYOGENIC PUMPS 21
1.2.4 DIAPHRAGM PUMPS 22
1.2.5 SUBMERSIBLE PUMPS 22
1.2.6 GEAR MOTORS 22
1.2.7 MOTOR CONTROL CENTERS 22
1.2.8 AC DRIVES 22
1.2.9 MOTOR SOFT STARTERS 23
1.2.10 PERMANENT MAGNET SYNCHRONOUS MOTORS 23
1.3 MARKET SCOPE 23
1.3.1 PUMP: MARKETS COVERED 23
1.3.2 MOTOR: MARKETS COVERED 24
1.3.3 YEARS CONSIDERED FOR THE STUDY 24
1.4 CURRENCY 25
1.5 LIMITATIONS 25
1.6 STAKEHOLDERS FOR PUMPS AND MOTORS* 25
2 RESEARCH METHODOLOGY 27
2.1 INTRODUCTION 27
2.1.1 SECONDARY DATA 28
2.1.1.1 Key data from secondary sources 28
2.1.2 PRIMARY DATA 29
2.1.2.1 Key data from primary sources 29
2.1.2.2 Breakdown of primaries 30
2.2 MARKET SIZE ESTIMATION 31
2.3 MARKET BREAKDOWN & DATA TRIANGULATION 31
2.4 RESEARCH ASSUMPTIONS 32
2.4.1 ASSUMPTIONS 32
3 EXECUTIVE SUMMARY 33
3.1 INTRODUCTION 33
3.2 CURRENT SCENARIO 33
3.3 FUTURE OUTLOOK 35
3.4 CONCLUSION 42
4 PUMPS AND MOTORS MARKET 43
4.1 INTRODUCTION 43
4.2 INTELLIGENT PUMPS 44
4.2.1 MARKET DYNAMICS 44
4.2.1.1 DRIVERS 45
4.2.1.1.1 Focus on energy efficiency 45
4.2.1.1.2 Growth in IIoT & economic benefits of intelligent systems 46
4.2.1.2 RESTRAINTS 47
4.2.1.2.1 High capital cost 47
4.2.1.3 OPPORTUNITIES 48
4.2.1.3.1 Robust growth in HVAC systems 48
4.2.1.3.2 Development of digital oilfields 49
4.2.1.3.3 Upcoming smart cities 49
4.2.1.4 CHALLENGES 49
4.2.1.4.1 Downturn in the mining industry 49
4.2.2 GLOBAL INTELLIGENT PUMP MARKET 50
4.2.2.1 Europe 51
4.2.2.2 North America 51
4.2.2.3 Asia-Pacific 52
4.2.2.4 Middle East 53
4.2.2.5 South America 53
4.3 HIGH PRESSURE PUMPS 54
4.3.1 MARKET DYNAMICS 55
4.3.1.1 DRIVERS 55
4.3.1.1.1 Investments in sectors other than oil & gas in the Middle East 55
4.3.1.1.2 Growth of manufacturing sector in South Asia 56
4.3.1.2 RESTRAINTS 57
4.3.1.2.1 Slowdown in oil & gas industry 57
4.3.1.2.2 Slowing industrial growth in China 57
4.3.1.3 OPPORTUNITIES 58
4.3.1.3.1 Carbon capture and sequestration 58
4.3.1.3.2 Wastewater treatment industry 59
4.3.1.4 CHALLENGES 60
4.3.1.4.1 Growing gray market 60
4.3.2 GLOBAL HIGH PRESSURE PUMPS MARKET 60
4.3.2.1 Europe 61
4.3.2.2 North America 62
4.3.2.3 Asia-Pacific 62
4.3.2.4 Middle East 63
4.3.2.5 Africa 64
4.3.2.6 South America 64
4.4 CRYOGENIC PUMPS 65
4.4.1 MARKET DYNAMICS 66
4.4.1.1 DRIVERS 66
4.4.1.1.1 Increasing gas-based generation 66
4.4.1.1.2 Rising demand for medical gases 67
4.4.1.2 RESTRAINTS 67
4.4.1.2.1 Decrease in global steel production 67
4.4.1.2.2 Decreasing capital expenditure in the semiconductor manufacturing industry 67
4.4.1.3 OPPORTUNITIES 67
4.4.1.3.1 Growing focus towards solar power generation 67
4.4.1.3.2 Increasing infrastructure spending 68
4.4.1.4 CHALLENGES 68
4.4.1.4.1 Technological advancements in turbomolecular pumps 68
4.4.1.4.2 Downturn in the oil & gas industry 68
4.4.2 GLOBAL CRYOGENIC PUMPS MARKET 69
4.4.2.1 EUROPE 70
4.4.2.2 North America 70
4.4.2.3 Asia-Pacific 71
4.4.2.4 Middle East 72
4.4.2.5 Africa 73
4.4.2.6 South America 73
4.5 DIAPHRAGM PUMPS 74
4.5.1 MARKET DYNAMICS 75
4.5.1.1 DRIVERS 75
4.5.1.1.1 Development in water, wastewater, & sanitation sector 75
4.5.1.1.2 Demand for diaphragm pumps in the chemical industry 76
4.5.1.2 RESTRAINTS 76
4.5.1.2.1 Problems associated with pulsation 76
4.5.1.3 OPPORTUNITIES 77
4.5.1.3.1 Growing pharmaceutical industry 77
4.5.1.3.2 Development of power generation facilities 77
4.5.1.4 CHALLENGES 78
4.5.1.4.1 Slowdown in the oil & gas industry 78
4.5.1.4.2 Downturn in the mining industry 78
4.5.2 GLOBAL DIAPHRAGM PUMPS MARKET 79
4.5.2.1 EUROPE 79
4.5.2.2 North America 80
4.5.2.3 Asia-Pacific 81
4.5.2.4 Middle East & Africa 81
4.5.2.5 South America 82
?
4.6 SUBMERSIBLE PUMPS 83
4.6.1 MARKET DYNAMICS 83
4.6.1.1 DRIVERS 84
4.6.1.1.1 Increasing Urbanized Population 84
4.6.1.1.2 Increasing Industrialization 85
4.6.1.1.3 Growing Infrastructure Investments 85
4.6.1.2 RESTRAINTS 86
4.6.1.2.1 Submersible Motor Failure & High Troubleshooting Cost 86
4.6.1.3 OPPORTUNITIES 86
4.6.1.3.1 New oilfield discoveries 86
4.6.1.4 CHALLENGES 87
4.6.1.4.1 Application Of Submersible Pump In The Presence Of Excess Air At A Pump Intake Is A Challenge 87
4.6.2 GLOBAL SUBMERSIBLE PUMP MARKET 87
4.6.2.1 Europe 88
4.6.2.2 North America 88
4.6.2.3 Asia-Pacific 89
4.6.2.4 Middle East & Africa 90
4.6.2.5 South America 91
4.7 GEAR MOTORS 91
4.7.1 MARKET DYNAMICS 92
4.7.1.1 DRIVERS 92
4.7.1.1.1 Modular & compact design 92
4.7.1.1.2 Mechanical simplicity 93
4.7.1.1.3 Growth of the renewable energy sector 93
4.7.1.2 RESTRAINTS 94
4.7.1.2.1 High maintenance cost 94
4.7.1.2.2 Use of direct drives & variable speed drives 94
4.7.1.3 OPPORTUNITIES 95
4.7.1.3.1 Development of hybrid technology 95
4.7.1.4 CHALLENGES 95
4.7.1.4.1 Gray market 95
4.7.1.4.2 High manufacturing cost 95
4.7.2 GLOBAL GEAR MOTORS MARKET 96
4.7.2.1 Europe 96
4.7.2.2 North America 98
4.7.2.3 Asia-Pacific 99
4.7.2.4 Middle East & Africa 99
4.7.2.5 South America 100
?
4.8 AC DRIVES 102
4.8.1 MARKET DYNAMICS 102
4.8.1.1 DRIVERS 102
4.8.1.1.1 Increasing urbanization & industrialization 102
4.8.1.1.2 Rising need for energy efficiency 103
4.8.1.1.3 Regulations on energy efficiency 103
4.8.1.2 RESTRAINTS 104
4.8.1.2.1 Slump in oil prices 104
4.8.1.3 OPPORTUNITIES 105
4.8.1.3.1 Huge opportunity in the replacement sector 105
4.8.1.3.2 Industrial Internet of Things (IIoT) 106
4.8.1.4 CHALLENGES 106
4.8.1.4.1 Regional level competition from local players 106
4.8.2 GLOBAL AC DRIVES MARKET 106
4.8.2.1 Europe 107
4.8.2.2 North America 108
4.8.2.3 Asia-Pacific 108
4.8.2.4 Middle East & Africa 109
4.8.2.5 South America 110
4.9 MOTOR SOFT STARTER 111
4.9.1 MARKET DYNAMICS 111
4.9.1.1 DRIVERS 112
4.9.1.1.1 Increasing demand of industrial pumps 112
4.9.1.1.2 Growing demand of HVAC control system market 112
4.9.1.1.3 Cost effectiveness & minimal space requirements 112
4.9.1.2 RESTRAINTS 113
4.9.1.2.1 Functional superiority of VFD 113
4.9.1.2.2 Competitive pricing of VFD in low voltage segment 113
4.9.1.3 OPPORTUNITIES 113
4.9.1.3.1 Applications employing large number of motors 113
4.9.1.3.2 Fixed speed applications 113
4.9.1.4 CHALLENGES 113
4.9.1.4.1 Growing focus on renewable energy 113
4.9.2 GLOBAL MOTOR SOFT STARTER MARKET 114
4.9.2.1 Europe 114
4.9.2.2 North America 115
4.9.2.3 Asia-Pacific 116
4.9.2.4 Middle East & Africa 116
4.9.2.5 South America 117
?
4.10 PERMANENT MAGNET SYNCHRONOUS MOTORS 118
4.10.1 MARKET DYNAMICS 118
4.10.1.1 DRIVERS 119
4.10.1.1.1 Increasing demand for energy-efficient motors 119
4.10.1.1.2 Use of low-cost ferrite permanent magnets 119
4.10.1.1.3 Low power consumption 119
4.10.1.1.4 Increased demand for PMSM in the industrial sector 120
4.10.1.1.5 Use of PMSM in the mining & metal industry 120
4.10.1.2 RESTRAINTS 120
4.10.1.2.1 High initial cost of the motors 120
4.10.1.2.2 Induction motor as a cost-effective substitute 120
4.10.1.3 OPPORTUNITIES 120
4.10.1.3.1 Demand for PMSM in railway vehicles 120
4.10.1.3.2 Depleting energy resources 121
4.10.1.4 CHALLENGES 121
4.10.1.4.1 Scarcity of rare earth magnets 121
4.10.2 GLOBAL PERMANENT MAGNET SYNCHRONOUS MOTOR MARKET 121
4.10.2.1 Europe 122
4.10.2.2 North America 123
4.10.2.3 Asia-Pacific 124
4.10.2.4 Middle East & Africa 124
4.10.2.5 South America 125
4.11 MOTOR CONTROL CENTER 126
4.11.1 MARKET DYNAMICS 127
4.11.1.1 DRIVERS 127
4.11.1.1.1 Growing demand for industrial automation in developed regions 127
4.11.1.1.2 Regulations promoting energy savings across major industries 128
4.11.1.1.3 Increased industrial plant uptime 128
4.11.1.2 RESTRAINTS 128
4.11.1.2.1 Decreasing greenfield investments 128
4.11.1.3 OPPORTUNITIES 129
4.11.1.3.1 Increasing urbanization & industrialization 129
4.11.1.3.2 Upgradation of industrial infrastructure in developed countries 129
4.11.1.4 CHALLENGES 129
4.11.1.4.1 High level of complexity involved in the maintenance of motor control centers 129
4.11.2 GLOBAL MOTOR CONTROL CENTER MARKET 130
4.11.2.1 Europe 130
4.11.2.2 North America 132
4.11.2.3 Asia-Pacific 133
4.11.2.4 Middle East & Africa 134
4.11.2.5 SOUTH AMERICA 136
5 COMPETITIVE LANDSCAPE 137
5.1 OVERVIEW 138
5.2 COMPETITIVE SITUATIONS & TRENDS 140
5.3 MARKET RANKING FOR PUMPS AND MOTORS MARKET, 2015 140
5.4 NEW PRODUCT DEVELOPMENT 143
5.5 CONTRACTS AND AGREEMENT 144
5.6 EXPANSIONS 145
5.7 MERGER & ACQUISITION 146
5.8 OTHER DEVELOPMENTS 147
6 COMPANY PROFILE 148
(Overview, Products & Services, Strategies & Insights, Developments and MnM View)*
6.1 INTRODUCTION 148
6.2 ABB LTD. 149
6.3 DANFOSS A/S 153
6.4 EATON CORPORATION PLC. 158
6.5 EMERSON ELECTRIC CO. 161
6.6 FLOWSERVE CORPORATION 165
6.7 GENERAL ELECTRIC 168
6.8 GRUNDFOS GROUP 171
6.9 MITSUBISHI ELECTRIC CORPORATION 181
6.10 ROCKWELL AUTOMATION INC. 184
6.11 SIEMENS AG 188
6.12 SULZER LTD. 193
6.13 TOSHIBA INTERNATIONAL CORPORATION 199
6.14 WEG SA 202
6.15 XYLEM INC. 205
6.16 YASKAWA ELECTRIC CORPORATION 210
6.17 ITT CORPORATION 212
6.18 COLFAX CORPORATION 212
6.19 KIRLOSKAR BROTHERS LTD. 212
6.20 REGAL BELOIT CORPORATION 213
6.21 KSB AKTIENGESELLSCHAFT 213
6.22 SEEPEX GMBH 214
6.23 WILO SE 214
6.24 GRUNWL 215
6.25 KSB GROUP 215
6.26 EBARA CORPORATION 215
6.27 ATLAS COPCO AB 216
6.28 HALLIBURTON COMPANY 216
6.29 THE GORMAN-RUPP COMPANY 217
6.30 TSURUMI MANUFACTURING CO., LTD. 217
6.31 ITT GOULDS PUMPS 218
6.32 TOYO DENKI INDUSTRIAL CO., LTD. 218
6.33 WALRUS PUMP CO., LTD. 218
6.34 ANDRITZ 219
6.35 GEA GROUP 219
6.36 THE WEIR GROUP PLC 219
6.37 CAT PUMPS 220
6.38 COMET S.P.A 220
6.39 MAXIMATOR GMBH 220
6.40 TELEDYNE ISCO 220
6.41 ZHEJIANG DANAU INDUSTRIES CO., LTD 220
6.42 UDOR S.P.A 221
6.43 SUMITOMO HEAVY INDUSTRIES LTD. 221
6.44 FIVES S.A. 221
6.45 BROOKS AUTOMATION INC. 221
6.46 GLOBAL TECHNOLOGIES 222
6.47 CRYOQUIP AUSTRALIA 222
6.48 CRYOSTAR SAS 222
6.49 NIKKISO CRYO INC 223
6.50 PHPK TECHNOLOGIES INC. 223
6.51 RUHRPUMPEN INC. 223
6.52 TECHNEX LIMITED 224
6.53 ACD LLC 224
6.54 SEHWA TECH INC. 224
6.55 PUMP SOLUTIONS GROUP (PSG) 224
6.56 IDEX CORPORATION 225
6.57 YAMADA CORPORATION 225
6.58 LEWA GMBH 225
6.59 VERDER INTERNATIONAL B.V. 226
6.60 INGERSOLL-RAND PLC 226
6.61 TAPFLO AB 226
6.62 LEAK-PROOF PUMPS (I) PVT. LTD. 227
6.63 SCHNEIDER ELECTRIC SE 227
6.64 FUJI ELECTRIC CO. LTD. 228
6.65 HITACHI LTD. 228
6.66 PARKER HANNIFIN CORPORATION 229
6.67 BALDOR ELECTRIC COMPANY 229
6.68 SEW-EURODRIVE GMBH & CO. KG 229
6.69 WINERGY 230
6.70 BONFIGLIOLI RIDUTTORI S.P.A. 230
6.71 BREVINI POWER TRANSMISSION S.P.A. 231
6.72 CHINA HIGH SPEED TRANSMISSION EQUIPMENT GROUP CO. LTD. 231
6.73 ELECON ENGINEERING COMPANY LTD. 231
6.74 JOHNSON ELECTRIC HOLDINGS LIMITED 232
6.75 SUMITOMO HEAVY INDUSTRIES LTD. 232
6.76 BAUER GEAR MOTOR GMBH 233
6.77 WATT DRIVE ANTRIEBSTECHNIK GMBH 233
6.78 VIDHYUT CONTROL INDIA PVT. LTD. 233
6.79 GEMCO CONTROLS LTD. 234
6.80 SUN-TECH ENGINEERS 234
6.81 ROLLA LTD. 234
6.82 TECHNICAL CONTROL SYSTEM LIMITED 235
6.83 LITTELFUSE INC. 235
6.84 CROMPTON GREAVES LIMITED 236
6.85 FAIRFORD ELECTRONICS LTD. 236
6.86 ALSTOM SA 237
6.87 MEIDENSHA CORPORATION 237
6.88 DRS TECHNOLOGIES 237
6.89 HANSEN CORPORATION 238
6.90 ZHEJIANG ZHONGYUAN ELECTRIC CO., LTD. 238
*Details on Overview, Products & Services, Strategies & Insights, Developments and MnM View might not be captured in case of unlisted companies.
7 APPENDIX 239
7.1 KEY INDUSTRY INSIGHTS 239
7.2 INTRODUCING RT: REAL-TIME MARKET INTELLIGENCE 241
7.3 AVAILABLE CUSTOMIZATIONS 242
7.4 COMPLETE SYNDICATED REPORTS 242
7.5 KNOWLEDGE STORE: MARKETSANDMARKETS’ SUBSCRIPTION PORTAL 244
7.6 AUTHOR DETAILS 246