|
最新螺絲標準
| |
|
 |
DIN Handbook 10
Fasteners 1 - Dimensional standards for bolts, screws and studs – National Standards
Publication date 2017-08 , 8 edition, 762 pages, A5, Paper covers
ISBN 978-3-410-27357-8
This 8th edition of DIN Handbook 10 Fasteners 1 contains 90 currently valid German national standards (DIN Standards) dealing with the dimensions of bolts, screws and studs. It is the companion volume to DIN Handbook 362 Fasteners 6, which contains only European Standards – DIN EN and DIN EN ISO Standards.
For ease of reference and to provide the user with an overview of the contents of both volumes on fasteners, a list of the standards in DIN Handbooks 10 and 362, arranged according to subject, is also included.
What is new in this edition?
Compared to the 7th edition of DIN Handbook 10, two standards are included for the first time:
- DIN 6929:2013-08, Screws with coarse thread and reduced shank for captive applications
- DIN 7500-2:2016-04, Thread rolling screws for ISO metric thread – Part 2: Guideline values for hole diameters (complying with DIN 7500-1 and DIN 267-30).
Since the last volume was published, 38 standards have been revised to reflect the latest developments in the fastener industry and the needs of our users.
|
 |
DIN Handbook 43
Fasteners 2 - Standards for pins, rivets, keys, adjusting and retaining rings
Publication date 2012-07, 4. Edition, 776 pages, A5, Paper covers
ISBN 978-3-410-22693-2
The 4th edition of DIN Handbook 43 contains 91 standards for unthreaded fasteners, such as pins, rivets, keys, adjusting and retaining rings.
The standards primarily cover
- dimensions
- design types
- requirements
- designations
- technical delivery conditions
Compared to the 3rd edition of DIN Handbook 43, three standards are included for the first time and 29 standards are revisions.
|
 |
DIN Handbook 55
Fasteners 3 - Standards for technical delivery conditions for bolts, screws, nuts and washers
Publication date 2014-01, 5. Edition, 730 pages, A5, Paper covers
ISBN 978-3-410-24363-2
This 5th edition of DIN Handbook 55 contains 42 standards dealing with technical delivery conditions for bolts, screws, nuts and washers. The standards cover mechanical and functional properties and their testing, as well as tolerances, acceptance testing, inspection documentation and quality assurance.
Compared to the 4th edition of DIN Handbook 55
- Two standards are new: DIN 34804 “Fasteners – Change of appearance of black surfaces” and DIN EN ISO 898-2 “Mechanical properties of fasteners made of carbon steel and alloy steel – Part 2: Nuts with specified property classes – Coarse thread and fine pitch thread”
- Five standards have been revised for this edition.
DIN Handbook 55 is one of a series of six handbooks on fasteners. DIN Handbook 45 “Threads for engineering” complements this series.
Who should buy this standard?
This handbook is developed for manufacturers and purchasers of bolts, screws, nuts and accessories for bolted connections; mechanical and design engineers, testing departments.
|
 |
DIN Handbook 140
Fasteners 4 - Basic and dimensional standards for nuts
Publication date 2016-04, 7. Edition, 756 pages, A5, Paper covers
ISBN 978-3-410-24531-5
DIN Handbook 140 Fasteners 4 is one of a series of six handbooks on fasteners (DIN Handbooks 10, 43, 55, 140, 193 and 362). This up-to-date reference work contains 65 English language versions of currently valid basic and dimensional standards for nuts. The full-text DIN, DIN EN and DIN EN ISO Standards cover topics including:
- Hexagon nuts
- Square nuts
- Castle nuts
- Domed cap nuts
- Weld nuts
- Knurled nuts
What is new?
This 7th edition of DIN Handbook 140 contains three standards which have been included for the first time and 32 standards have been revised for this edition. The three new standards are:
- DIN EN 14399-2:2015-04 High-strength structural bolting assemblies for preloading
- DIN EN ISO 225:2011-02 Fasteners – Bolts, screws, studs and nuts – Symbols and descriptions of dimensions (Multilingual standard: German, English, French and Russian)
- DIN EN ISO 898-2 Nuts with specified property classes – Coarse and fine pitch thread
As an essential reference work on fasteners, DIN Handbook 140 will prove a useful source of information on correct technical practice for students, mechanical and design engineers as well as manufacturers and purchasers of mechanical fasteners.
|
 |
DIN HANDBOOK 193
Fasteners 5 - Basic standards
Publication date 11.2018, 4. Edition, 618 Pages, A5, Paper covers
ISBN 978-3-410-27495-7
The 4th edition of DIN Handbook 193 once again provides the user with a current reference volume containing basic standards on fasteners in a handy, compact format. Basic standards are standards which should remain unchanged over long periods of time, as they largely specify basic geometric requirements that are crucial when it comes to the interchangeability and compatibility of products. Consequently, the changes made since the last edition of this DIN Handbook, in addition to predominantly editorial revisions made to standards on geometric dimensions, have mainly focused on terminology standards. To ensure unambiguous communication in today's worldwide fasteners market, the specification of clear designations and definitions has become increasingly important. A good example is a standard new to this compilation: DIN EN ISO 1891-2, a multilingual standard (nine different languages, including Chinese and Japanese) that specifies terms and definitions for fastener coatings primarily intended for corrosion protection and functional purposes.
What is new?
This updated volume contains 40 fundamental standards on fasteners overall, covering such areas as countersinks and counterbores, widths across flats, thread runouts and thread undercuts, bolt and screw ends, stud ends and tapped holes for compression couplings, driving features, tolerances for screw threads and, as previously mentioned, key terminology.
Eleven standards have been revised for this edition including DIN 918 “Fasteners – Terminology, spelling of terms, abbreviations” as well as Supplement 3 to DIN 918, which provides a current overview of European standards on fasteners and their relationship to German national standards.
|
 |
DIN Handbook 362
Fasteners 6 - Dimensional standards for bolts and screws – European Standards
Publication date 2012-05, 2. Edition, 788 pages, A5, Paper covers
ISBN 978-3-410-22827-1
The 2nd edition of DIN Handbook 362 includes 60 European Standards for dimensions of bolts and screws.
Compared to the 1st edition 25 standards, especially those dealing with slotted head screws, hexagon head screws, cross recessed head screws and hexalobular socket head screws, have been revised.
15 standards (including DIN EN ISO 7380-2 and DIN EN ISO 12474 on hexagon socket head cap screws as well as three further parts of the DIN EN 14399 series on high-strength structural bolting assemblies) are new to this compilation.
|
 |
IFI INCH FASTENER STANDARDS -10th Edition
Date Published: 2018
The 2018 Edition IFI Book of Fastener Standards is a convenient compilation the most commonly used fastener standards for inch fasteners and non-ISO metric fasteners. The book contains 92 separate standard specifications issued by ASTM, ASME, SAE and IFI. The 2018 IFI Book of Fastener Standards is the tenth edition of the Book of Standards published by the Industrial Fasteners Institute. This edition represents 77 years of continued development in fastener standards and practice since the first edition was published in 1941. During this period, copies have been distributed to major manufacturing and construction interests throughout the world. The IFI Book of Standards is considered a “BIBLE” for designers, manufacturing engineers, and managers in all industries. The 2018 Edition is the next step in continuing a tradition of dedicated service to the fastener supplying industry and the companies they serve.
As with the preceding 9th edition, this 2018 Edition contains the standard specifications only. An extensive body of technical information and commentary on all matters related to fasteners is contained in the IFI Fastener Technology Handbook
|
 |
ASTM Volume 01.09 Fasteners; Rolling Element Bearings
2020 Print Volume (85 Standards - 990 Pages)
ISBN 978-1-6822-1612-5
This volume covers specifications for internally and externally threaded fasteners, and non-threaded driven fasteners. Also included are standards on rolling element bearings, establishing properties for bearings used in automotive and aerospace applications.
|
 |
英訳 JIS HB ねじ 2020
A5判・1,808頁
収録規格数：138
目次項目：用語・表し方・製図、基本、部品、一般部品〔小ねじ／止めねじ／タッピンねじ／木ねじ／ ボルト／ナット／座金〕
|
|
