涵堂資訊有限公司
工業標準搜尋諮詢服務
找不到您所需要的標準資料嗎?
歡迎來電洽詢。
請撥打 +886 2 27993110
或透過電子郵件與我們聯絡 standards@hintoninfo.com

組織／文章編號
ISO
搜尋結果：找到 21829 筆資料

頁面路徑選單

  • 【組　　織】ISO
  • 【文件編號】ISO 26362

  • Access panels in market, opinion and social research — Vocabulary and service requirements - First Edition

  • 【日　　期】2009/1/15
  • 【語　　言】English
  • 【狀　　態】Active
  • 【組　　織】ISO
  • 【文件編號】ISO 2332

  • Agricultural tractors and machinery - Connection of implements via three-point linkage - Clearance zone around implement - Third Edition

  • 【日　　期】2009/1/15
  • 【語　　言】English
  • 【狀　　態】Active
  • 【組　　織】ISO
  • 【文件編號】ISO 730

  • Agricultural wheeled tractors - Rear-mounted three-point linkage - Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 - First Edition

  • 【日　　期】2009/1/15
  • 【語　　言】English
  • 【狀　　態】Active
  • 【組　　織】ISO
  • 【文件編號】ISO 730 AMD 1

  • Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 - First Edition

  • 【日　　期】2009/1/15
  • 【語　　言】English
  • 【狀　　態】Active
  • 【組　　織】ISO
  • 【文件編號】ISO 11001-3

  • Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 3: Link coupler - Second Edition

  • 【日　　期】2009/1/15
  • 【語　　言】English
  • 【狀　　態】Active
  • 【組　　織】ISO
  • 【文件編號】ISO 23814

  • Cranes - Competency requirements for crane inspectors - First Edition

  • 【日　　期】2009/1/15
  • 【語　　言】English
  • 【狀　　態】Active
  • 【組　　織】ISO
  • 【文件編號】ISO 22951

  • Data dictionary and message sets for preemption and prioritization signal systems for emergency and public transport vehicles (PRESTO) - First Edition

  • 【日　　期】2009/1/15
  • 【語　　言】English
  • 【狀　　態】Active
  • 【組　　織】ISO
  • 【文件編號】ISO 26423

  • Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of coating thickness by crater-grinding method - First Edition

  • 【日　　期】2009/1/15
  • 【語　　言】English
  • 【狀　　態】Active
  • 【組　　織】ISO
  • 【文件編號】ISO 8062-3 CORR 1

  • Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings TECHNICAL CORRIGENDUM 1 - First Edition

  • 【日　　期】2009/1/15
  • 【語　　言】English
  • 【狀　　態】Active
  • 【組　　織】ISO
  • 【文件編號】ISO 463 CORR 2

  • Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges TECHNICAL CORRIGENDUM 2 - First Edition

  • 【日　　期】2009/1/15
  • 【語　　言】English
  • 【狀　　態】Active