ISO
搜尋結果：找到 21829 筆資料
- 【組 織】ISO
- 【文件編號】ISO 6199
Micrographics - Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm - Operating procedures - Second edition
- 【日 期】2005/6/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO TS 9941
Milk and canned evaporated milk Determination of tin content Spectrometric method - Second Edition
- 【日 期】2005/6/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 14096-1
Non-destructive testing Qualification of radiographic film digitisation systems Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control - First Edition
- 【日 期】2005/6/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 14096-2
Non-destructive testing Qualification of radiographic film digitisation systems Part 2: Minimum requirements - First Edition
- 【日 期】2005/6/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 11556
Paper and board - Determination of curl using a single vertically suspended test piece - Second Edition
- 【日 期】2005/6/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 16790
Plastics Determination of drawing characteristics of thermoplastics in the molten state - First Edition
- 【日 期】2005/6/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 15031-4
Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 4: External test equipment - Second Edition
- 【日 期】2005/6/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 4927
Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) - Second Edition
- 【日 期】2005/6/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 6117
Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.) - Second Edition
- 【日 期】2005/6/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 2859-5
Sampling procedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection - First Edition
- 【日 期】2005/6/15
- 【語 言】English
- 【狀 態】Active
