ISO
搜尋結果：找到 21829 筆資料
- 【組 織】ISO
- 【文件編號】ISO 8178-10
Reciprocating Internal Combustion Engines - Exhaust Emission Measurement - Part 10: Test Cycles and Test Procedures for Field Measurement of Exhaust Gas Smoke Emissions from Compression Ignition Engines Operating Under Transient Conditions - First Edition
- 【日 期】2002/11/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 3808
Road Vehicles - Unscreened High-Voltage Ignition Cables - General Specifications, Test Methods and Requirements - First Edition
- 【日 期】2002/11/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 14915-1
Software ergonomics for multimedia user interfaces - Part 1: Design principles and framework - First Edition
- 【日 期】2002/11/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 12141
Stationary source emissions Determination of mass concentration of particulate matter (dust) at low concentrations Manual gravimetric method - First edition
- 【日 期】2002/11/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 230-6
Test code for machine tools Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests) - First edition
- 【日 期】2002/11/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 12947-3 CORR 1
Textiles - Determination of the Abrasion Resistance of Fabrics by the Martindale Method - Part 3: Determination of Mass Loss - First Edition
- 【日 期】2002/11/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 9073-11
Textiles Test methods for nonwovens Part 11: Run-off - First Edition
- 【日 期】2002/11/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 9073-12
Textiles Test methods for nonwovens Part 12: Demand absorbency - First Edition
- 【日 期】2002/11/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 5414-1
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools Part 1: Dimensions of the driving system of tool shanks - Third Edition
- 【日 期】2002/11/1
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 5414-2
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools Part 2: Connecting dimensions of chucks and designation - Second Edition
- 【日 期】2002/11/1
- 【語 言】English
- 【狀 態】Active
