ISO
搜尋結果：找到 21829 筆資料
- 【組 織】ISO
- 【文件編號】ISO 14802
Corrosion of metals and alloys - Guidelines for applying statistics to analysis of corrosion data - First Edition
- 【日 期】2012/7/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 10649-5
Cutter arbors with parallel key and tenon drive - Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface - First Edition
- 【日 期】2012/7/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 10649-6
Cutter arbors with parallel key and tenon drive - Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system - First Edition
- 【日 期】2012/7/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 13504
Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment - First Edition
- 【日 期】2012/7/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 13017
Dentistry - Magnetic attachments - First Edition
- 【日 期】2012/7/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 13459
Earth-moving machinery - Trainer seat - Deflection limiting volume, space envelope and performance requirements - Second Edition
- 【日 期】2012/7/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 8600-7
Endoscopes - Medical endoscopes and endotherapy devices - Part 7: Basic requirements for medical endoscopes of water-resistant type - First Edition
- 【日 期】2012/7/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 14627
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture resistance of silicon nitride materials for rolling bearing balls at room temperature by indentation fracture (IF) method - First Edition
- 【日 期】2012/7/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 14628
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for rolling contact fatigue of silicon nitride ceramics at room temperature by balls-on-flat method - First Edition
- 【日 期】2012/7/15
- 【語 言】English
- 【狀 態】Active
- 【組 織】ISO
- 【文件編號】ISO 3601-1 CORR 1
Fluid power systems - O-rings - Part 1: Inside diameters, cross-sections, tolerances and designation codes TECHNICAL CORRIGENDUM 1 - Fifth Edition
- 【日 期】2012/7/15
- 【語 言】English
- 【狀 態】Active
